User Manual
Table Of Contents
- Contents
- Safety information
- Note Ex area
- Quick start
- Quick start with the PC
- Quick start with adjustment module MINICOM
- 1 Product description
- 1.1 Function
- 1.2 Application features
- 1.3 Adjustment
- 1.4 Antennas
- 2 Types and versions
- 2.1 Survey
- 2.2 Configuration of measuring systems
- 3 Technical data
- 3.1 Technical data
- 3.2 Approvals
- 3.3 Dimensions
- 4 Mounting and installation
- 4.1 General installation instructions
- 4.2 Measurement of liquids
- 4.3 Measurement in standpipe (surge or bypass tube)
- 4.4 False echoes
- 4.5 Common installation mistakes
- 5 Electrical connection
- 5.1 Connection and connection cable
- 5.2 Connection of the sensor
- 5.3 Connection of the external indicating instrument VEGADIS 50
- 6 Setup
- 6.1 Adjustment methods
- 6.2 Adjustment with PC
- 6.3 Adjustment with adjustment module MINICOM
- 6.4 Adjustment with HART® handheld
- 7.2 Error codes
- 7 Diagnostics
- 7.1 Simulation
6 VEGAPULS 42 and 44 – 4 … 20 mA
Quick start
100.0%
at
m (d)
XX.XXX
OK
+ –
or
+ –
or
Enter 100 %.
The 100 % value is allocated
to the following distance and
the distance indication flashes.
Enter the distance with full
vessel, e.g. 1.27 m.
Condit-
ioning
Scal-
ing
0 %
corres
ponds
XXXX
Adjust-
ment
Para-
meter
Sensor
m(d)
4.700
(Max. adjustment)
OK
OK
Enter the figure for the filling at 0 %, e.g.
0001.
OK
+ –
or
0 %
corres
ponds
XXXX
100 %
corres
ponds
XXXX
Deci-
mal
point
888.8
prop.
to
Volume
Unit
m
3
+ –
or
Enter the figure of the 100 %
filling, e.g. 2166 for 216.6 m
3
Enter the position of the
comma, so that 216.6 is dis-
played.
+ –
or
Choose the physical unit, e.g.
volume.
+ –
or
Choose the unit of measure-
ment, e.g. m
3
.
+ –
or
OK
+ –
or
OK
+ –
or
Enter 0 %.
The 0 % value is allocated to
the following distance and the
distance indication flashes.
Enter the empty distance, e.g.
5.85 m.
The value pair 0 % and 5.85 m
is written into the sensor.
0.0%
at
m (d)
5,85
Full adjustment
Scaling of measured value display
Key Display text
100.0%
at
m (d)
1,27