User Manual
Table Of Contents
- Contents
- Safety information
- Note Ex area
- Quick start
- Quick start with the PC
- Quick start with adjustment module MINICOM
- 1 Product description
- 1.1 Function
- 1.2 Application features
- 1.3 Adjustment
- 1.4 Antennas
- 2 Types and versions
- 2.1 Survey
- 2.2 Configuration of measuring systems
- 3 Technical data
- 3.1 Technical data
- 3.2 Approvals
- 3.3 Dimensions
- 4 Mounting and installation
- 4.1 General installation instructions
- 4.2 Measurement of liquids
- 4.3 Measurement in standpipe (surge or bypass tube)
- 4.4 False echoes
- 4.5 Common installation mistakes
- 5 Electrical connection
- 5.1 Connection and connection cable
- 5.2 Connection of the sensor
- 5.3 Connection of the external indicating instrument VEGADIS 50
- 6 Setup
- 6.1 Adjustment methods
- 6.2 Adjustment with PC
- 6.3 Adjustment with adjustment module MINICOM
- 6.4 Adjustment with HART® handheld
- 7.2 Error codes
- 7 Diagnostics
- 7.1 Simulation
VEGAPULS 42 and 44 – 4 … 20 mA 61
Parameter adjustment 1
Meas. loop data
• Click to the menu item "
Instrument data/
Parameter adjustment
“.
Setup
Configuration
Configuration info
• Choose the menu "Configuration/Measure-
ment loop“, to get further information on the
sensor type, the software version of the
sensor, the measuring unit, the measure-
ment loop designation etc.
• Click to "
Quit
“.
Create new/modify measurement loop
• Click to the menu
"Configuration/Measure-
ment loop/Modify
. This is the first step in
setting up the sensor.
• Now enter in this menu whether a level, a
distance or a gauge should be measured
and click to "
OK
“.
In the menu "
Modify meas. loop configuration
“
you can give a name (e.g. vessel 10) and a
description (e.g. sludge separator) to the
measurement loop.
You are now in the initial menu window „
In-
strument data parameter adjustment
“.
• Click to the menu item "
Meas. loop data
“.