User Manual

VEGAPULS 42 and 44 – 4 … 20 mA 73
• Quit the menu with " OK “.
• Confirm with " OK “ and your individual
linearisation curve is saved in the sensor.
Again in the menu window " Conditioning “, you
can enter with the menu item " Integration
time “ a measured value integration. This is
recommended for agitated product surfaces,
to prevent rapid fluctuation of the output
signal and the measured value indication.
The standard setting is an integration time of
0 seconds.
• Quit the menu with " OK “.
You are again in the menu window " Instru-
ment data parameter adjustment “.
• Quit the menu window with " OK “.
Parameter adjustment for current out-
put and sensor display
• Choose " Instrument data parameter ad-
justment “.
• Choose in the menu window " Instrument
data parameter adjustment “ the menu item
„ Outputs “.
Setup
You are in the menu window " Outputs “.
Parameter adjustment current output
With the menu item " Current output “ you
choose the menu window " Current output “.
Here you can adjust the signal condition of
the 4 … 20 mA output signal.
• Click to " Save “, if you have made adjust-
ments in this menu window.
• If the adjustments should remain un-
changed, click to " Quit “.
You are again in the menu window " Outputs “.