User Manual
Table Of Contents
- Contents
- Safety information
- Note Ex area
- Quick start
- Quick start with the PC
- Quick start with adjustment module MINICOM
- 1 Product description
- 1.1 Function
- 1.2 Application features
- 1.3 Adjustment
- 1.4 Antennas
- 2 Types and versions
- 2.1 Survey
- 2.2 Configuration of measuring systems
- 3 Technical data
- 3.1 Technical data
- 3.2 Approvals
- 3.3 Dimensions
- 4 Mounting and installation
- 4.1 General installation instructions
- 4.2 Measurement of liquids
- 4.3 Measurement in standpipe (surge or bypass tube)
- 4.4 False echoes
- 4.5 Common installation mistakes
- 5 Electrical connection
- 5.1 Connection and connection cable
- 5.2 Connection of the sensor
- 5.3 Connection of the external indicating instrument VEGADIS 50
- 6 Setup
- 6.1 Adjustment methods
- 6.2 Adjustment with PC
- 6.3 Adjustment with adjustment module MINICOM
- 6.4 Adjustment with HART® handheld
- 7.2 Error codes
- 7 Diagnostics
- 7.1 Simulation
74 VEGAPULS 42 and 44 – 4 … 20 mA
The menu window "
Display of measured
value
“ opens. In this menu window you can
also set the filling height in the vessel or the
signal current and the indication display to
any value (simulate measured value).
First of all, the actual measured value and the
signal current are displayed.
• Click to "
Start
“
in the turquoise window
segment.
Interface parameter adjustment
and
Display of measured value
See manual "VEGA Visual Operating“.
Simulation
• Click to the menu "
Diagnostics/Simulation
“.
Setup
The menu window "
Sensor-Display
“ opens.
Here you can once again adjust the sensor
display.
• Choose "
Scaled
“, if the display should
show your previous adjustments. In the
example a level of 45 … 1200 liters would
be displayed.
• Choose "
Volume percent
“, if the level of
45 … 1200 liters should be displayed as
percentage value of 0 … 100 %.
• Choose "
Distance
“, to have the actual
distance to the product surface displayed
(in m).
• Choose
"
Percent
“, if you want to have the
product distance from 1.270 to 5.850 m
displayed as percentage value of
0 … 100 %.
With "
Save
“ the adjustment is transferred to
the sensor.
• Click in the window "
Sensor-Display
“ to
"
Quit
“.
• Click in the window "Outputs“ to "
Quit
“.
You are again in the menu window "
Instru-
ment data parameter adjustment
“.
Parameter adjustment sensor display
• Click in the menu window "
Outputs
“ to the
menu item "
Display of measured value
“.