User Manual
Table Of Contents
- Contents
- Safety information
- Note Ex area
- Quick start
- Quick start with the PC
- Quick start with adjustment module MINICOM
- 1 Product description
- 1.1 Function
- 1.2 Application features
- 1.3 Adjustment
- 1.4 Antennas
- 2 Types and versions
- 2.1 Survey
- 2.2 Configuration of measuring systems
- 3 Technical data
- 3.1 Technical data
- 3.2 Approvals
- 3.3 Dimensions
- 4 Mounting and installation
- 4.1 General installation instructions
- 4.2 Measurement of liquids
- 4.3 Measurement in standpipe (surge or bypass tube)
- 4.4 False echoes
- 4.5 Common installation mistakes
- 5 Electrical connection
- 5.1 Connection and connection cable
- 5.2 Connection of the sensor
- 5.3 Connection of the external indicating instrument VEGADIS 50
- 6 Setup
- 6.1 Adjustment methods
- 6.2 Adjustment with PC
- 6.3 Adjustment with adjustment module MINICOM
- 6.4 Adjustment with HART® handheld
- 7.2 Error codes
- 7 Diagnostics
- 7.1 Simulation
VEGAPULS 42 and 44 – 4 … 20 mA 9
Product description
Temperature influence: Temperature error absolutely
zero (e.g. at 500°C 0.018 %)
Pressure influence: Error with pressure increase very
low (e.g. at 50 bar 1.44 %)
100 500 1000 1300 ˚C
0
0
0,01
0,02
0,03
%
0,018 %
0,023 %
10
0
0
5
%
1,44 %
2,8 %
10
50
20 30 40 60
100
70 80 90 110 120 130 140
bar
0,29 %
3,89 %
Continuous and reliable
Unaffected by temperature, pressure and
individual gas atmospheres, VEGAPULS
radar sensors are used for quick and reliable
continuous level measurement of various
products.
VEGAPULS 40 sensors enable level meas-
urement with radar in facilities where previ-
ously, due to high cost, it was completely out
of the question.
1.2 Application features
Applications
• level measurement of liquids
• measurement also in vacuum
• all slightly conductive materials and all
substances with a dielectric constant > 2.0
can be measured
• measuring range 0 … 10 m (type 42).
measuring range 0 … 20 m (type 44).
Two-wire technology
• supply and output signal on one two-wire
cable (Loop powered)
• 4 … 20 mA output signal or HART
®
output
signal.
Rugged and abrasion proof
• non-contact
• high-resistance materials
Exact and reliable
• accuracy 0.05 %.
• resolution 1 mm.
• unaffected by noise, vapours, dusts, gas
compositions and inert gas stratification
• unaffected by varying density and tem-
perature of the medium
• measurement in pressures up to 40 bar
and product temperatures up to 200°C
Communicative
• integrated display of measured value
• optional display module separate from
sensor
• adjustment with detachable adjustment
module, pluggable in the sensor or in the
external display
• adjustment from the PLC level with the PC
• adjustment with HART
®
handheld
Approvals
• CENELEC, ATEX, PTB, FM, CSA, ABS,
LRS, GL, LR, FCC.