User Manual

Fig. 11: Orientation in liquids
The version with swivelling holder ensures optimum
orientation of the sensor to the solid cone.
Loosen the screw on the swivelling holder with a flat
wrench SW 13, direct the sensor and retighten the
screw, torque max. 20 Nm.
The radar sensor should be installed at a location where
no installations cross the radar signals.
Vessel installations such as, for example, ladders, limit
switches, heating spirals, struts, etc. can cause false
echoes superimposed on the useful echo. Make sure
when planning your measuring location that the radar
signals have "free access" to the measured product.
In case of existing vessel installations, a false echo
storage should be carried out during setup.
If large vessel installations such as struts or supports
cause false echoes, these can be attenuated through
supplementary measures. Small, inclined sheet metal
baffles above the installations scatter the radar signals
and avoid a direct false echo reflection.
Fig. 12: Cover smooth profiles with deflectors
Vessel installations
20 VEGAPULS 68 - 4 ... 20 mA/HART
Mounting
29261-EN-050202