User Manual

9 Check the hold of the wires in the terminals by lightly
pulling on them
10 Connect the screen to the internal ground terminal
and the external ground terminal to potential equa-
lisation
11 Tighten the compression nut of the cable entry, the
seal ring must completely encircle the cable
12 Screw the housing cover back on
The electrical connection is finished.
Fig. 14: Connection steps 6 and 7
5.3 Wiring plans, single chamber housing
The following illustrations apply to the non-Exaswellas
to the Ex ia version.
24 VEGAPULS 68 - 4 ... 20 mA/HART
Connecting to power supply
29261-EN-050202