User Manual

10 Supplement
10.1 Technical data
General data
Materials, non-wetted parts
- housing plastic PBT (Polyester), Alu-die casting
powder-coated, 316L (stainless steel
1.4435)
- seal ring between housing and
housing cover
NBR (stainless steel housing), silicone
(Alu/plastic housing)
- inspection window in housing
cover for PLICSCOM
Polycarbonate
- ground terminal stainless steel 1.4571/1.4435
Materials, wetted parts
- process fitting thread G1½A and 1½ NPT, flanges DN 50
... DN 200 and 2" ... 8": 316 L (stainless
steel 1.4435)
-
Antenna 316 L (stainless steel 1.4435), PTFE (TFM
1600 PTFE)
- seal, antenna system Viton, Kalrez 2035, 6230, 6375, 6623
Weight with horn antenna
- process fitting, thread 2.0 ... 2.8 kg (4.4 ... 6.2 lbs), depending on
the thread size and housing
- process fitting, flange 4.2 ... 15.4 kg (9.3 ... 34 lbs), depending
on the flange size and housing
- process fitting swivelling holder
with flange
5.2 ... 16.4
kg (11.5 ... 35.2 lbs), depen-
ding on the flange size and housing
Weight with parabolic antenna
- process fitting, thread 2.8 ... 3.6 kg (6.2 ... 13.7 lbs), depending
on the thread size and housing
- process fitting, flange 5.0 ... 16.2 kg (11 ... 35.7 lbs ), depending
on the flange size and housing
- process fitting swivelling holder
with flange
6.0 ... 17.2 kg (13.2 ... 37.9 lbs), depen-
ding on the flange size and housing
52 VEGAPULS 68 - 4 ... 20 mA/HART
Supplement
29261-EN-050202