User's Manual
Table Of Contents
![](/manual/vega-grieshaber/mipr61/user-s-manual-english/images/img-13.png)
Avoid mounting the instrument too close to the vessel wall. Reflections
from the vessel wall or from vessel installation can influence the
switching accuracy.
Fig. 4: Installation position (top view)
If VEGAMIP 61 is mounted in the filling stream, unwanted false
measurement signals can be generated. For this reason, mount
VEGAMIP 61 at a position in the vessel where no disturbances, e.g.
from filling openings, agitators, etc., can occur.
Microwaves can penetrate non-conductive materials. Hence, it is
possible to measure through the wall of non-conductive vessels.
Fig. 5: Bulk solids vessel of plastic
In metal vessels, you have to mount VEGAMIP 61 on flanges or
threaded sockets. It is also possible to measure through a window. In
general, all products such as glass, ceramic and plastic are suitable as
window material.
Inflowing medium
Non-metallic vessels
Metal vessels
VEGAMIP R61 • - Relay 13
4 Mounting
35786-EN-100531