User's Manual

2
1
Fig. 9: Front-flush installation
1 Unfavourable installation - bulk solid can settle in front of the sensor
2 Correct front flush installation
In very abrasive products, VEGAMIP 61 should be installed with a
mounting adapter or in front of a suitable window. In this case, you
have to use a window material which is appropriately resistant.
For an optimum switching signal, the two sensors must be adapted to
each other. The accuracy must be in a range of ±5°.
General rule: the bigger the antenna and the better it focusses, the
more precise the orientation has to be.
Abrasive medium
Orientation of the sensor
16 VEGAMIP R61 • - Relay
4 Mounting
35786-EN-100531