User Manual

Fig. 6: Mounting of the radar sensor on vessels with conical bottom
Do not mount the instruments in or above the filling stream. Make sure
that you detect the product surface, not the inflowing product.
Fig. 7: Mounting of the radar sensor with inflowing medium
The socket piece should be dimensioned in such a way that the
antenna end protrudes at least 10 mm (0.4 in) out of the socket.
Inflowing medium
Socket
VEGAPULS 62 • 4 … 20 mA/HART two-wire 15
4 Mounting
36503-EN-100607