User Manual

l 1 x closing cap ½ NPT, 1 x blind stopper
½ NPT , 1 x blind stopper M16 x 1.5 or
optionally
7)
1 x plug M12 x 1 for external
indicating and adjustment unit
or:
l 1 x plug (depending on the version), 1 x blind
stopper M20 x 1.5; 1 x blind stopper M16 x 1.5
or optionally
8)
1 x plug M12 x 1 for external
indicating and adjustment unit
Spring-loaded terminals for wire cross-section
- Massive wire, cord 0.2 … 2 .5 mm² (AWG 24 … 14)
- Cord with cable end sleeve 0.2 … 1.5 mm² (AWG 24 … 16)
Electromechanical data - version IP 66/IP 68 (1 bar)
Cable entry
- Single chamber housing 1 x IP 68 cable gland M20 x 1.5; 1 x blind stopper
M20 x 1 .5
- Double chamber housing 1 x IP 68 cable gland M20 x 1.5; 1 x blind stopper
M20 x 1 .5; 1 x blind stopper M16 x 1.5
Connection cable
- Wire cross-section 0.5 mm² (AWG 20)
- Wire resistance < 0.036 Ω/m
- Tensile strength < 1200 N (270 lbf)
- Standard length 5 m (16.4 ft)
- Max. length 1000 m (3280 ft)
- Min. bending radius 25 mm (0.984 in) with 25 °C (77 °F)
- Diameter approx. 8 mm (0.315 in)
- Colour - standard PE Black
- Colour - standard PUR Blue
- Colour - Ex-version Blue
Indicating and adjustment module
Voltage supply and data transmission through the sensor
Indication LC display in dot matrix
Adjustment elements 4 keys
Protection rating
- unassembled IP 20
- mounted into the sensor without cover IP 40
Materials
7)
Only with Ex d version
8)
Only with Ex d version
VEGAPULS 62 • 4 … 20 mA/HART two-wire 61
11 Supplement
36503-EN-100607