User's Manual
Table Of Contents
- 1 About this document
- 2 For your safety
- 3 Product description
- 4 Mounting
- 5 Connecting to power supply
- 5.1 Preparing the connection
- 5.2 Connecting
- 5.3 Wiring plan, single chamber housing
- 5.4 Wiring plan, double chamber housing
- 5.5 Double chamber housing Ex d
- 5.6 Wiring plan, double chamber housing Ex d ia
- 5.7 Double chamber housing with DISADAPT
- 5.8 Wiring plan - version IP 66/IP 68, 1 bar
- 5.9 Switch-on phase
- 6 Set up with the display and adjustment module
- 7 Setup with PACTware
- 8 Set up with other systems
- 9 Diagnosis, asset management and service
- 10 Dismount
- 11 Supplement
24
4 Mounting
VEGAPULS 69 • 4 … 20 mA/HART - two-wire
47247-EN-170315
r
rr...
/
1
3
/
1
2
Fig. 14: Mounting position and orientation
With the help of an optional swivelling holder, the sensor can be
easily aligned to the vessel centre. The necessary angle of inclination
depends on the vessel dimensions. It can be easily checked with a
suitable bubble tube or mechanic's level on the sensor.