User's Manual

3 Product description
3.1 Configuration
The VEGAPULS 62 radar sensor is available in two electronics
versions:
l Standard electronics type PS60K
l Electronics with increased sensitivity type PS60S
The respective version can be determined by means of the
type label on the electronics.
The electronics version influences the CE conformity, the
functional safety (SIL), the factory setting for the product
selection and vessel, form, the accuracy, the voltage supply as
well as the approvals of VEGAPULS 62. The differences are
specified in this operating instructions manual in the respective
paragraphs.
The scope of delivery encompasses:
l VEGAPULS 62 radar sensor
l documentation
- this operating instructions manual
- Supplementary instructions manual "Safety Manual -
Functional safety acc. to IEC 61508 (SIL)"
2)
- Operating instructions manual "Indicating and adjust-
ment module PLICSCOM" (optional)
- Supplementary instructions manual "Heating for indi-
cating and adjustment module PLICSCOM" (optional)
- Supplementary instructions manual "Plug connector for
continuously measuring sensors" (optional)
- Ex-specific "Safety instructions" (with Ex versions)
- if necessary, further certificates
VEGAPULS 62 consists of the following components:
l Horn or parabolic antenna
l process fitting (depending on the version flange or thread)
l optionally available with purging air connection, reflux valve
l Housing with electronics, optionally available with plug
connector, optionally available with connection cable
l Housing cover, optionally available with indicating and
adjustment module PLICSCOM
The components are available in different versions.
2)
Not with electronics version with increased sensitivity
Versions
Scope of delivery
Components
10 VEGAPULS 62 - 4 ... 20 mA/HART
Product description
28435-EN-060317