User's Manual

Function Reset value
Lighting no reset
Language no reset
SIL no reset
HART mode no reset
Factory setting
Like basic setting, in addition special parameters are reset to
default values.
10)
Peak values
The min. and max. distance values are reset to the current
value.
Additional adjustment and diagnosis options such as e.g.
scaling, simulation or trend curve presentation are shown in
the following menu schematic. You will find a detailed
description of these menu items in the operating instructions
manual of the indicating and adjustment module.
10)
10)
Special parameters are parameters which are set customer-specifically on
the service level with the adjustment software PACTware™.
Optional settings
Setup with the indicating and adjustment module PLICSCOM
VEGAPULS 62 - 4 ... 20 mA/HART 43
28435-EN-060317