Instruction Manual

1 Loosen fixing screw
OUT
IN
IP 20
1
Fig. 4: Mounting on carrier rail
1 Fixing screw
2 Place the overvoltage arrester onto the rail and let it snap in
3 Tighten fixing screw
3.5 Mounting in housing
The overvoltage arrester is optionally available in a plastic or
aluminium housing. Make sure when mounting that the cable glands
point downward. Thus avoids water ingress.
1
3
2
OUT
IN
IP 20
Fig. 5: Mounting in Aluminium housing
1 Overvoltage arrester
2 Pressure compensation
3 Ground terminal
10 Overvoltage arrester • B62-36G
3 Product description
40491-EN-120329