User guide

35
6Setupwiththedisplayandadjustmentmodule
MINITRAC 31 • Foundation Fieldbus
41782-EN-131119
Prerequisites
Thefollowingrequirementsmustbefullledforreliableandsafe
operation:
•
Thetubemustbelled.Theremustbenoairbubblesinthetube
•
Thesourcecontainerisswitchedon
•
A sample point is close to the measuring point
Warning:
Whenthesourcecontainerisswitchedon,thetubemustalwaysbe
lled.Ifthetubeisempty,therecanbeanincreasedlocaldoserate.
Makesurethatthetubeislledevenincaseofplantdowntime,or
switchthesourcecontainero.
Carryoutasetupinthesequencedescribedinthefollowing.
Caution:
Duringtherstsetuporafteraninstrumentresettheinstrumentstarts
withpresetstandardvalues.Thesevaluearenotsuitableforyourap-
plication and must be replaced by real values.
Themainmenuisdividedintovesectionswiththefollowingfunc-
tions:
Setup: Settings, e.g. for measurement loop name, isotope, applica-
tion, background radiation, adjustment, signal output
Display: Settings, for example language, measured value display
Diagnosis: Information, for example, of device status, peak value,
simulation
Additional adjustments: Instrument unit, reset, date/time, copying
function
Info:Instrumentname,hardwareandsoftwareversion,dateofmanu-
facture, instrument features
Check if the correct language is already set for the display. If not, you
can change the language in the menu item "Display/Language".
StartwiththesetupofMINITRAC31.
In the main menu point "Setup", the individual submenu points
shouldbeselectedoneaftertheotherandprovidedwiththecorrect
parameters to ensure optimum adjustment of the measurement. The
procedureisdescribedinthefollowing.
Stickwiththenormalsequenceofthemenuitemsascloselyaspos-
sible.
Instrument start
Main menu
Procedure