User guide

54
6Setupwiththedisplayandadjustmentmodule
MINITRAC 31 • Foundation Fieldbus
41782-EN-131119
Menu Menu item Default value
Display Language Selected language
Displayed value Pulse rate
Display unit ct/s
With this function
•
Load parameter adjustment data from the sensor into the display
and adjustment module
•
Write parameter adjustment data from the display and adjustment
module into the sensor
This parameter is described in the operating instructions manual
"Display and adjustment module".
Info
Inthismenuyouwillndthefollowingmenuitems:
•
Instrumentname-showsinstrumentnameandserialnumber
•
Instrumentversion-showshardwareandsoftwareversionofthe
instrument
•
Dateofmanufacture-showscalibrationdateandthedateofthe
last change
•
DeviceID-showsthedeviceIDandthesensorTAG(PD_TAG)
•
Instrumentfeatures-showsfurtherinstrumentfeatures
These parameters are described in the operating instructions manual
"Display and adjustment module".
6.6 Parameter adjustment - X-ray alarm
X-rayradiation,forexample,causewithweldjointtestscaninuence
your measured values unnoticeably. Hence it is importnat to recog-
nizedinterferingX-rayradiation.
TheMINITRAC31recognizestheX-rayraditationandreactsfroman
individuallydenableraditiationvolume.
The level or density measuring instrument acts as Master and the
MINITRAC 31 operates as Slave.
Firstofall,denethefunctionoftheSlaveinstrumentbeforeyou
denetheMasterinstrument.TheMasterinstrumentcanthusimme-
diatelyrecognizetheconnectedSlave.
Forthispurpose,theSlaveinstrumentmustbedenedas"X-ray
alarm". Select under the menu item "Setup/Application" the function
"X-ray alarm".
Youcansettheaddress(MGC)ontheSlaveinstrumentatwill.Only
the address "0 - 0" is reserved for the Master instrument.
Set the address setting (MGC) on the Master instrument to "0 - 0".
Additional adjustments -
Copy instrument settings
Info
X-ray alarm