User guide

64
9 Diagnostics and service
MINITRAC 31 • Foundation Fieldbus
41782-EN-131119
Code
Text mes-
sage
Cause Rectication
F036
Faulty pro-
gram memory
– Errorduringsoftware
update
– Repeatsoftwareupdate
– Exchanging the electronics
F037
RAM hard-
wareerror
– Error in RAM – Restart instrument
– Exchanging the electronics
F038
Slave signals
failure
– Connection cable to the
Slave instrument interrupted
– Instrumentnotdenedas
Slave instrument
– Check the connection cable
to the Slave instrument
– DeneinstrumentasSlave
F040
Hardware
error
– Sensor defective – Restart instrument
– Exchanging the electronics
F041
Photomultipli-
er error
– Error in the measured value
recording
– Restart instrument
– Exchanging the electronics
F052
Faultycong-
uration
– Invalid parameter adjust-
ment
– Carry out a reset
F066
Faulty adjust-
ment
– Adjustment not yet carried
out
– Error during adjustment or
whenenteringthelineariza-
tion table
– Carrying out adjustment
– Carryoutlinearization
F068
Count rate too
high
– Faulty instrument settings – Carry out a reset
F072
Limit exceed-
ed
– Faulty instrument settings – Carry out a reset
F073
Error real val-
ue correction
– Faulty real value correction – Carry out real value correc-
tion again
F080
System error
– Instrument error – Restart instrument
– Call our service
F086
Communica-
tion error
– Error in the Fieldbus com-
munication
– Restart instrument
– Call our service
F114
Error real time
clock
– Discharge accumulator – Readjust real time clock
F120
Filter time
error
– Faulty or missing instrument
adjustment
– Carrying out adjustment