Supplementary instructions Plug connector M12x1 for level sensors Document ID: 30382
Contents Contents 1 For your safety 1.1 Appropriate use................................................................................................................. 3 1.2 General safety instructions................................................................................................ 3 1.3 Safety instructions for Ex areas......................................................................................... 3 2 Connecting to power supply 2.1 General information...........................
1 For your safety 1 For your safety 1.1 Appropriate use 1.2 General safety instructions 1.3 Safety instructions for Ex areas The plug connectors belong to the accessories for level, switching and pressure sensors. They provide a detachable connection to power supply/signal processing for level switches. The safety information in the operating instructions manual of the respective sensor must be noted. Please note the Ex-specific safety information for installation and operation in Ex areas.
2 Connecting to power supply 2 Connecting to power supply 2.1 General information 2.2 Wiring plan - M12 x 1 plug, 4-pole Each respective wiring plan shows the assignment of the individual pins of the plug connector to the respective signal outputs. The chart shows the assignment of the individual contact pins to the terminals of the sensor electronics. Transistor output 1 4 2 3 Fig.
2 Connecting to power supply Contact pin Colour - connection cable Terminal - electronics module VEGACAP, VEGAWAVE, VEGAVIB, VEGASWING 61 63, VEGAKON VEGASWING 66 VEGAMIP R61, R62 VEGAMIP T61 1 Pin 1 Brown 1 1 1 - Brown 21) - 62) - Pin 3 Blue 4 4 2 2 Pin 4 Black 3 2 7 - Two-wire output, NAMUR output 1 4 2 3 Fig.
2 Connecting to power supply Contact pin Colour - connection cable Terminal, electronics module Pin 3 Blue 3 Pin 4 Black 4 Pin 5 Two-wire output, NAMUR output 5 1 4 2 3 Fig.
3 Supplement 3 Supplement 3.1 Technical data Materials Contact support Contact Housing ƲƲ Plastic version ƲƲ Stainless steel version (only for twowire and NAMUR versions) PA, self-extinguishing CuZn, nickel layer and 0.
All statements concerning scope of delivery, application, practical use and operating conditions of the sensors and processing systems correspond to the information available at the time of printing. Subject to change without prior notice © VEGA Grieshaber KG, Schiltach/Germany 2013 VEGA Grieshaber KG Am Hohenstein 113 77761 Schiltach Germany Phone +49 7836 50-0 Fax +49 7836 50-201 E-mail: info.de@vega.com www.vega.
