Release Note TH LINK PROFIBUS Version 6.1 Document: RN_TH LINK PROFIBUS_6.1.0.
Release Note 1. Components of the current product version Component HW Release TH LINK 2. FW Release 2.0 6.1.0.0 Manuals of product version Description Language Installationsanleitung German 1.1 Installation Guide English 1.1 3. Release System requirements For configuration of TH LINK and use of TH SCOPE easy the following system requirements have to be fulfilled: 3.1. Network • 1 free IP address • enablement of ports 80 and IP 224.0.5.128 port 2364 UDP 3.2.
Release Note 6. Compatibility The TH LINK is compatible with • TH SCOPE* release 1.1.0.0 • PROFIBUS Scope* release 4.2 • TH OPC Server DP release 2.0 • CommDTM PROFIBUS DP-V1 release 3.0 or higher • TACC release 2.2 or higher and supports baud rates up to 12 MBit/s. * The TH LINK supports the marked applications as well as the preinstalled TH SCOPE easy with baud rates up to 1,5 MBit/s. 7. Mean Time Between Failures The MTBF value is 701,543 hours. 8.
Release Note 10. • Notes and known problems Data that cannot be queried from the device because the device does not provide them are displayed with “n.a.” for "not available". • Data that cannot be determined are not incorporated in the calculation of sums. • Redundant master is displayed incorrect in the Live List. • The assumed computer system time varies about 3 minutes after 1 week. Document: RN_TH LINK PROFIBUS_6.1.0.
Release Note 11. History Changes in Release 6.0.2.2 (23-May-2012) Changed functions • Time stamp: When the measurement is started without a valid time server or taken over computer system time, all diagnostics will be displayed with a time stamp of 1970. Even if these settings will be changed later, the date for the previously occurred diagnostics remains unchanged. Bugs fixes • The buttons “Test” and “Synchronize” were not disabled when changes in the time server settings have been made.
Release Note 12. Frequently asked questions Access Q: How many people can access the TH LINK via web at the same time? A: Up to six people can access on the TH LINK simultaneously. Once a person logs onto the TH LINK as an administrator, no one else can access it. Time display Q: I selected Yes in Use time server, but I always get a time stamp of the year 1970. Why is that so? A: It may be that the time server you set is not available from your network.
Release Note Q: Why does the HEX code of the manufacturer specific diagnostics not match with the entry in the vendor manual? A: The first byte of the manufacturer specific diagnostics is already decoded in TH SCOPE easy and displayed as “manufacturer specific diagnostics. Document: RN_TH LINK PROFIBUS_6.1.0.
Release Note 13. Approval Name Company/Position Function Manuela Sievers Trebing + Himstedt Andreas Mikolaschek Trebing + Himstedt Stefan Trebing Trebing + Himstedt Product manager Test manager Technical leader Date Signature Author Release Approve Note: Signatures on the original only Document: RN_TH LINK PROFIBUS_6.1.0.
