UNIVERSAL WIRELESS MICROPHONE MODEL:WM-2 Please read the user manual carefully before use
Specification Comprehensive features Carrier frequency range: .......470MHz-960 MHz (Depend on the country standard) Modulation Mode: ...................................................................FM adjustable frequency Max offset frequency: ..........................................................................................±45KHz Frequency Response: .................................................................................50Hz-15KHz S/N Ratio: .............................................
Receiver Function Description Instructions 1.Microphone Hold down power button for 3 seconds to turn on/off mic. When mic is on, press channel-adjust button to adjust the channel. Then " " on the screen will show channel like CH01, CH02, CH03 and so on. When " " shows in the screen and keeps flash, it means the battery is under low power status. 1 2 3 4 5 6 2. Receiver Turn on the receiver and plug it into the audio outlet(Amplifier). If RF is on, mic will work normally.
Troubleshooting Packing List Problem Solution Microphone : ....................................................................... 2 pcs Microphone is not working Please replace the battery and make sure battery is put at the correct position(positive and negative) Receiver : ............................................................................. 1 pc Receiver fails to turn on Please charge it Anti-roll Ring : ......................................................................