Owner`s manual

Hydro-Hot Hydronic Heating System Shop Manual 07/03
R
Page 53
Fuel Solenoid
Fuel Solenoid
Valve Kit
Fuel
Solenoid
Electrical Terminals
(+)
(-)
Fuel
Solenoid Shaft
Lock Nut
Photo Disc
Retaining Clamp
Ignition Cable
Violet wire
Brown wire
Retaining Clip
Fuel Solenoid
Assembly
Section 8: Diesel-Burner Service, Maintenance, and Repair Information
Fuel
Solenoid
,
continue
d
8. Reinstall the Photo Disc and secure in place with the Retaining Clip.
Connect the C-Plug Harness' Violet (+) and Brown (-) wires to the
Fuel Solenoid's (+) and (-) Electrical Terminals, reference Figure 18.
9. Perform the "Ignition Electrodes Adjustment Procedure" in Section
8.5, Page 48 to complete the Fuel Solenoid installation.
NOTE: If
a long after-smoking condition exists during the Diesel-
Burner's purge-cycle (reference Page 12, Step 6), the Fuel Solenoid
Valve Kit may need to be replaced, reference Figure 18. Please contact
our Technical Department at 1-800-685-4298 for assistance. Reference
Section 10 for spare parts information.
Figure 18