Operation Manual

6
Veho MUVI Operation
1. Charge your Veho MUVI by connecting the USB cable to your PC/Mac/Notebook or using an
(optional) Veho USB Adapter and the mini USB jack on the base of the MUVI. While charging
the MUVI LED indicator will display red. Once fully charged the red LED indicator will turn off.
2. Insert the micro SD card into the slot on the right side of the MUVI.
3. Power the MUVI on by the switch on the left hand side of the MUVI. If no micro SD card has
been inserted then the LED indicator will flash green quickly. While the MUVI remains well
charged the indicator remains solid blue. When the MUVI becomes low on charge the
Indicator flashes blue slowly.
4. If the MUVI has good charge but has not been used in 2 minutes it will switch to standby
mode. If the MUVI has low charge and has not been used in 2 minutes it will power off
completely.
5. To record manually once MUVI is powered on press the record button on top of MUVI. The
LED indicator will switch from solid blue to green and flash slowly. If the MUVI is in standby
mode then press record once to re-activate (LED shows blue) and record again to start
recording (LED flashes green slowly). Press record button to stop recording and the MUVI
footage will be saved to SD card as *.avi file.
6. If the LED is solid green then the micro SD card is full and you will need to move your MUVI
footage to a PC or connect to PC to delete footage.
English