Operation Manual

10 11
6. Accessing Muvi K-Series Settings
To enter the sengs menu press and hold
the start record buon for three seconds. The
camcorder symbol will appear on the LCD
display.
Press the stop record buon repeatedly to
navigate through the opons unl you reach
the M symbol. Press the start record buon to
enter the menu.
The following menu will appear.
Use the camera buon and stop record buon to move between the opons. Press
the start record buon to select to enter video sengs, to enter photo
sengs or to enter general camcorder sengs. Move to EXIT and press the start
record buon to exit the sengs menu.
Enter the sengs menu and then select the general camcorder sengs menu. Use
the camera buon and stop record buon to move between the opons. Press the
start record buon to select the opon you want to change.
Set the key tone volume to o, medium or standard.
Turn status LEDs on or o.
Turn the on screen display on or o on oponal LCD screen.
Loop Record – Turn on to connually overwrite les when the
memory becomes full.
Set the auto standby funcon to o, 2, 5 or 10 minutes.
See the TV standard to NTSC or PAL depending on your area.
Changing this seng will also aect the frame rate per second that
you can record at. See page 16
Turn on the central spot exposure mode to on or o.
Turn the G-Sensor mode on or o. For further informaon on the
G-Sensor funcon please see page 17.
Set the language for the camcorder menu. Languages available are:
Simplied Chinese, Tradional Chinese, English, German, French,
Italian, Spanish, Portuguese, Russian or Japanese.
7. General camcorder settings