Operation Manual
16 17
10. G-Sensor
The G-Sensor mode on the K-Series camcorder is a camera movement acvaon
funcon. This means that when the G-Sensor mode is turned on it will acvely
sense a change in gravity, for example if it is knocked, lted or moved, and will start
recording automacally without needing to press the start record buon. If the
camcorder has not sensed any gravity change for 3 minutes it will stop recording.
You can also stop recording by manually pressing the stop record buon.
Please note that this is a video funcon only and if the G-Sensor mode is turned
on whilst in camera mode it will automacally revert to video mode and then start
recording if it senses a change in gravity.
Choose between
PAL (see page 11, NTSC (see page 11,
camcorder sengs) camcorder sengs)
1080I at 50fps 1080I at 60fps
1080p at 25fps 1080p at 30fps
960p at 25fps or 48fps 960p at 30fps or 48fpss
720p at 25fps or 50fps 720p at 30fps or 60fps
480 (WVGA) at 50fps or 100 fps 480 (WVGA) at 60fps or 120 fps
Choose the angle of view for recording between wide (140°), medium
(120°), narrow (100°) and small (80°).
Choose the bit rate for recording videos between ne or normal. The
ne bit rate is higher so you will get a clearer picture with an increased
le size.
Set me lapse to take an image every 0.5, 1, 2, 5, 10 or 30 seconds.
Press the start record buon to start taking images and press the stop
record buon to nish. Camcorder will automacally create a me lapse
video using the images.
Set the video self-mer to 5, 10 or 20 seconds.
180° photo rollover. Turn this opon on to keep your videos upright
when using the camcorder upside down.
Turn the date and me stamp on or o.
Exit the video sengs menu and return to the main sengs menu.
EXIT