Operation Manual

20 21
12. K-Series Waterproof Case
Please ensure that you keep the rubber seal that lines the waterproof case clean.
Small parcles such as a hair or grain of sand can break the waterproof seal and
cause a leak and damage your K-Series camcorder.
If you use the waterproof case in salt water rinse it with fresh water aer each use.
Failure to do this will cause a build-up of salt and compromise the waterproof seal.
Never dry the waterproof case with a cloth as lint may compromise the waterproof
seal, either shake dry or leave to air dry.
Veho cannot be held liable for consequenal, incidental and conngent damages
to personal property due to misuse or improper installaon, or improper care and
maintenance of the K-Series waterproof case. Veho will not, under any circumstance,
cover the replacement or cost of repair of any electronic device or personal property
inside or outside of the case.
An-Mist Inserts
To prevent misng when using the waterproof case place two An-Mist inserts down
the sides of the waterproof case prior to use, ensuring that they do not interfere
with the rubber seal on the housing. The insert will soak up any moisture and
stop the lens from misng. To reuse dry the insert in an oven at 150°C/300°F for
5 minutes. Each insert can be re-used 4-5 mes. Please ensure that you store the
inserts in an airght bag.