Operation Manual
8 9
5. Getting Started
Inserng the baery
Before inserng the baery make sure that the lock switch is in the unlock posion.
Slide the baery into the camcorder, and then move the lock switch into the lock
posion to lock the baery into place.
Charging the Muvi K-Series
To charge the camcorder, connect it to a USB port using the supplied USB cable. The
red LED will ash whilst charging. It will take approximately 3 hours for the camcorder
to fully charge. Once fully charged the red LED will stop ashing and stay on.
Inserng the microSD card
The K-Series camcorder supports microSD and microSDHC cards up to 32GB.
Although any class of card can be used with the camcorder it is recommended that a
class 6 or higher card is used for the best results.
With the camcorder turned o, remove the port cover on the side of the camcorder
and insert the microSD card into the microSD slot. You will hear a click to indicate
that the card has been inserted correctly. To remove the microSD card press the
card into the camcorder to release it. The card will pop out slightly so that you can
remove it.
Turning on the Muvi K-Series
Turn on the camcorder by moving the power switch on the front of the camcorder to
the on posion. The start-up Muvi logo will appear on the LCD display and the power
indicator will turn red. Once the LCD display changes to the informaon display the
camcorder is ready to use. Please note that the camcorder will be become warm
during use.
LCD informaon display
Camcorder mode Video resoluon and frame rate
Remaining video recording
me on microSD card
Baery level