-0-
Table of Contents EN 1. Precaution ................................................................. 2 2. Preparation ................................................................ 5 z Standard Accessories ..................................... 5 z Part Names..................................................... 6 3. Install the Software.................................................... 7 z Installing the Software in Windows................. 7 z Installing the Software in Mac.........................
Welcome Thank you for purchasing a Digital Image Copier. Please take a moment to read through this manual. Its contents will send you on an educational journey into your recorder multiple capabilities. 1. Precaution Before using Digital Image Copier, please ensure that you read and understand the safety precautions described below. Always ensure that the Digital Image Copier is operated correctly.
If you notice smoke or a strange odor coming from Digital Image Copier, turn the power off immediately. EN Take Digital Image Copier to the nearest authorized service center for repair. Never attempt to repair Digital Image Copier on your own. • Use only the recommended power accessories. Use of power sources not expressly recommended for Digital Image Copier may lead to overheating, distortion of the equipment, fire, electrical shock or other hazards.
FCC Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy. If not installed and used in accordance with the instruction, it may cause harmful interference to radio communication.
2.
Part Names Note: We strongly suggest using a clean, dry, non-alcohol cotton swab to insert into the Digital Image Copier slot and clean the glass surface periodically to produce a clear image. Please make sure your film negatives/ mounted slides and cover trays are clean before inserting into the Digital Image Copier as well. Dust or dirt from the negatives and cover trays will affect the quality of your scanned images.
3. Install the Software This scanner is support by Microsoft UVC (Universal Video Class) and Plug & Play technology, therefore, does not need separate driver software. To use the photo scanner you must install ArcSoft MediaImpression in advance. Installing the Software in Windows 1. Insert the installation CD into the CD-ROM drive and the installation CD menu should appear. 2. When you see the following screen, choose “ArcSoft MediaImpression” to install the software. 3. Follow the on-screen instructions.
Installing the Software in Mac 1. Insert the installation CD into the CD-ROM drive and click CD icon. 2. Click” MediaImpression Installer” 3. Follow the on-screen instructions.
4. Place Film/ Slide Into The Holder 1. Open the negative/ positive slide holder as Illustrated. 2. Put a negative film/ positive slide/ 110 film into holder as shown. 3. Close the holder and please make sure the holder close properly.
5. Using the Digital Image Copier 1. Plug the USB cable of the Digital Image Copier into your computer’s USB 2.0 port.Once connected the power LED light will be blue. 2. Insert the loaded film/ slide holder properly into the slot as shown. You can adjust the location of the film by moving the film holder; the film holder can be moved in both directions.
3. 4. Click on the MediaImpression icon on the desktop and you will see the following. Click “Get Photo” and choose “Acquire”. Select “Acquire from Film Scanner”.
5. Define your save settings: a) There are two formats JPG or TIF for setting. b) There are four quality levels (Highest/ High/ Normal/ Low) for selection in JPG format. c) Select the location to save your image.
d) There are two film size (135 film, 110 film) for selection. Please choose the size which is your photo loaded. e) Click “OK”.
6. Click “Capture” to save image to your computer. 7. Moving the film holder and press “Capture” for next film scan.
6. Edit The Pictures First, click on the picture to select, and then use the ArcSoft tools to edit the pictures as you like. Edit Photo Editing Tools The Photo Editing Tools module includes a complete set of photo enhancement, editing and retouching controls. The windows can be stretched to provide a large size view of the active photo. Double click the module’s tool bar to maximize the window to fill the computer screen.
1.2 Color This feature is designed to fix digital photos that have unnatural color or appear too dark. It’s also great for fixing scanned versions of old prints that have faded or whose colors have changed after many years. How to fix the color of a photo: 1. Drag the color balance sliders to make the photo color appear more natural. Add red or yellow to make the photo warmer. Add blue or green to make the photo cooler. 2.
2. Drag the small white box inside the zoom navigator to move over a red eye. 3. Place your cursor directly over the red eye and click. 4. Repeat the process until all the red eyes are fixed. 5. Click “Undo” if you make a mistake or don’t like the result. 1.4 Crop This feature enables you to trim photos for a dramatic effect or cut off the distracting parts of a picture. This feature enables you to trim photos for dramatic effect or cut off the distracting parts of a picture.
How to use Straighten: 1. Move the slider (or click the rotate buttons) until the photo appears straight. 2. Use the superimposed grid lines for vertical and horizontal reference. 3. Click “Apply” if you like the result. Click “Cancel” if you do not. 1.6 Blur Background This feature can be used in subtle way – to tone down un-important background details, or for dramatic effect- by making the main subject of a photo “pop out” of the picture. How to use the Blur Background function: 1.
2. Retouch 2.1 Healing Brush The Healing Brush is good for fixing dust, scratches and removing skin blemishes. How to use the Healing Brush to fix a skin blemish: 1. Establish a source point for the Healing Brush by holding the Shift key and clicking on an area of the skin that is close in color and texture to the area you want to heal. 2. Use the zoom control to zoom in on the blemish. 3. Adjust the size of the healing brush so the cursor (circle) is only slightly larger than the blemish. 4.
3. Click and hold your mouse button and carefully paint over the telephone pole. Do not release the mouse button until the job is done. The sky will be cloned into place. 4. Click “Undo” if you make a mistake or don’t like the result. 2.3 Lighten/Darken The Light/Darken tool is good for adjusting specific areas of a photo. 2.4 Smudge Simulate the smearing of wet paint. Please click and drag the sliders below to change the brush size and sharpness. 2.5 Sharpen Sharpen blurry areas.
2.7 Paint Brush Allows you to “paint” on your image when you click and drag the mouse. Click and drag the sliders below to change the brush size and transparency. 2.8 Line Draw a straight line in the photo. Click and drag the sliders below to change the line width and transparency. 2.9 Eraser Simulate an eraser, removing the image painting by paintbrush and line tools from your photo. Click and drag the sliders below to change the eraser size and effect. 3.
7. Appendix Specifications Image Sensor 1/4” inch 3 mega CMOS sensor UVC (Driver Free) Lens Specification F=2.8, f=3.85, 4P Color Balance Automatic Exposure Control Automatic Support film size 135 film (36mm x 24mm) auto cropping 110 film (17mm x 13mm) Support film type Slide auto converting Color Negative Film Black & White Negative Film Focus Range Fixed focus PC interface USB 2.0 Scan High Resolution 1120dpi(enhances to 1800/3600dpi via interpolation) Data Conversion 24 bits R.G.
PC System Requirements z Intel® Pentium® 4 1.6 GHz or equivalent AMD Athlon z Free USB2.0 port z 512MB RAM internal memory minimum z 500MB free hard disk space z 800 x 600 pixel color monitor z CD-ROM drive z NVIDIA Geforce MX440 or above, AMD(ATI) Radeon 9200 or above z Direct X 9.0 or higher ® z Windows XP Service Pack II / Vista™, 32/64 bits Windows OS support UVC device driver since XP Service Pack 2 Mac System Requirements z Power PC G5 or Intel Core Duo processor recommended z Free USB2.
For support in the UK please visit our FAQ/Technical and Download center on our website veho is a registered trade mark. www.veho-uk.com or technical support contact: technical@veho-uk.com This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed at the end of its life separately from your household waste. There are separate collection systems for recycling in the EU.
