Operation Manual

Select…> ALL-Selects all of the audio in all of the tracks in the project.

Select…>Start to Cursor-Selects from the beginning of the selected tracks to

the cursor position.

Select…>Cursor to End –

Selects from the cursor position to the end of the

selected tracks.

Find Zero Crossings – Modifies the selection slightly so that both the left and

right edge of the selection appear on a positive-slope zero crossing. This

makes it easier to cut and paste audio without hearing clicking sounds.

Selection Save –

Remembers the current selection (or cursor position),

allowing you to restore it later.

Selection Restore –

Restores the cursor position to the last position saved

by “ Selection Save”.

Move Cursor…> to Track Start- Moves the cursor to the start of the current

track.

Move Cursor…>to Track End-Move the cursor to the end of the currently

selected track.

Move Cursor…>

to Selection Start-Moves the cursor to the end of the current

selection.

Move Cursor…>

to Selection End-Moves the cursor to the end of the current

selection.

Snap-To…>Snap On- Enable Snap-To mode. When Snap-To mode is

enabled, the selection will be constrained to the nearest interval on the time

scale, by default the nearest second. So if you click and drag from 4.2

seconds to 9.8 seconds, it will result in a selection from 4 seconds to 10

seconds, exactly. You can change the units that are snapped to using the “Set

Selection Format” option in the View Menu.

Snap-To…> Snap Off – Turns Snap-To mode off letting you select arbitrary

ranges of time.

Preferences… - opens the Preferences dialog.