Operation Manual

Unpacking and setting up
Unpack the main unit and find the mains power plug and plug into an available socket.
Amplifier connection
Connect audio plugs to Alert input on your mixer or amplifier:
- Red plug into R/H channel input.
- White plug into L/H channel input.
Playing a record
- Place the record of your choice on the turntable. If it is a 45 rpm, do not forget to place
the adapter on the record spindle.
- Choose the desired playing speed using the Speed switch.
- Release the arm lock.
- Gently push the tone arm with your hand.
- Place the cartridge vertically over the first track of the record. The turntable will start
turning automatically.
- Slowly put down the cartridge until it touches the record. The record player will start playing.
- When records has finished, the platter will stop automatically if the Autostop switch has been
switched to [ON].
NOTE:
- Lift the tone arm and put it on the rest.
- Place the protective cap on the stylus and close the arm lock.
- Turn off by unplugging the plug from the socket.