Instructions / Assembly

7
Step 5: Front bar wrist support assembly:
Slide the front bar feet into the front bar without tightening. As shown in the figure below:
Step 6: Arms with front bar assembly:
Put front bar feet bolt through the hole of small arm, then position the front bar. After positioning, tighten the nut with
wrench, as figure below:
15
11
11
15
11
11
15
11
Step4: Front bar assembly
Connect the front bar with connectors and secure it with the corresponding bolts as figure below:
. (please keep the front bar aligned).
1
5-
2
15
-
1
18