J Candy cane 1 K Gift box 1 6 Latch H Plastic tie 1 Ground stake MAKE SURE TO FOLLOW THE STEPS BELOW FOR A SUCCESSFUL & EASY ASSEMBLY TIP: To ensure the final unit Is secure and sturdy It Is highly recommended to ‘secure each component with the zip ties provided after connecting each component together In the steps. TO ASSEMBLE 1. Remove al components from the box end lay fet on the floor NOTE: Some parts are connects by a siring of lights and should NOT be separated.
3. Insert the metal post of Body (C}) Into the corresponding metal cylinder of the Leg (B) and using plastic ties(H) to secure them. (see Fig.2) 4. Insert the metal post of pole Into the compounding metal ring of the Body (C) and secure them with the latch(G). (see fig. 2) NOTE: Fully Insert the latch to the hole. ol Fig 5. Insert the metal post of tha Ams {L} Into the corresponding metal cylinder of the Fig.3) 6.
8. Insert the metal post of the Candy cane (J) Intel the corresponding metal cylinder of the Fig.3) 8 Insert the metal post of the Gift bx (K) into the corresponding metal cylinder of the Fig.3) Fig 10. Secure the installing points with plastic ties (H) and secure the base to the sift ground by fully inserting the ground stakes (1) into the ground. (see fig 5) Figs 11. Connect the plug to the extension cord and pig the light set Into a standard 120-vomit AC electrical outlet.
