STOP’ MISSING A PART? @ CALL US BEFORE GOING BACK TO THE STORE The store where you made your purchase Does not stock parts for this ten. If you have assembly questions or you are missing or have damaged parts please call L850 (Mon-Sun 1000 am to 700 pin BSL) Yad at Also Gama Circumstance surveillance com or visibility vexatious com Please prefer email contact. Due to busy lines, there may be a wait for calls to be answered.
MAKE SURE TO FOLLOW THE STEPS BELOW FOR A SUCCESSFUL & EASY ASSEMBLY TIP: To ensure the final unit Is secure and sturdy It Is highly recommended to secure each component with the zip tiles provided after connecting each component together In the steps. TO ASSEMBLE 1.Remove all components from the box and lay fiat on the floor. NOTE: Some parts are connected by a string of lights and should NOT be separated.
3. Connect the Stander(D) to the Sign(A). (see Fig.2) {a) Expand the Stander(D) and insert the hook to the corresponding metal cylinder of the Sign(A). {b) Hook the rod of Stander{D) fo the corresponding ring of the Sign(A). Fig.
4. Insert the metal post of Gift boxes (B} into the corresponding metal cylinder of the Fig.3) 5. Insert the metal post of the Holy leaf (C) into the corresponding metal cylinder of the Fig 3) 6. Secure the Installing points with plastic les (F) and secure the base to the soft ground by fully Inserting the ground stakes (G} Into the fig 3) Fig 3 7. Connect the plug to the extension cord and plug the light set into a standard 120-volt AC electrical outlet.
