User manual

2.2 Description of Camera Parts
Lens Mount
This mount is used to install a CS-mount lens. CS-adaptor ring is required when using a C
mount lens.
Camera Mounting Screw Holes
Screw holes for mounting the camera.
Mount Adaptor
The adaptor can be attached onto the top or the bottom of the unit.
Auto Iris Lens Connector (4-pin type)
The lens connector supplies the auto-iris lens (not supplied) with DC control signal.
PIN NO.
VIDEO
DC
1
DC + 12V
CONTROL -
2
NC
CONTROL +
3
IRIS
DRIVE +
4
GND
DRIVE -
OSD Control Buttons
ENTER button
UP & DOWN buttons
LEFT & RIGHT buttons
4 VSSC-68CDNR-90