User manual

41 42
Configuration
4. Clic
k
Modify . The Record Disk Path menu opens.
Select
SD1
Click Modify
5. Check Enable.
Check Enable
Click Format
6. Under File System , select SDVideo (recommended) or Ext3.
7. Click Format. A window will appear to show the status of the
f o rmatting.
Wait
for the formatting to complete and then click OK.
NOTE: If the Record Disk Path menu does not open or formatting does not
occur, disable any
popup bl ock er s.
To configure FTP storage location:
1. Click
Local Record>Record Directory.
2. Under Disk Name , select ftp.
Select
ftp
Click Modify
3. Click Modify . The Record Disk Path opens.
4.
Check Enable.
5. Configure the
f o ll owing:
Check Enable
Configure FT
P
server
information
Click OK
• IP: Enter the FTP server address.
• Port: Enter the FTP port number.
• Accounts: Enter the FTP account user name.
• Pa ss wo r d / C o n f i r m Password: Enter the FTP password.
• Free Space: Enter the amount of space (in MB) you would like to make
available on the
FTP server for recording.