User manual

45 46
Configuration
6. Set up recording using the Record Policy sub-menu (see “8.9.1 Record
Directory” on page 40). To access your recordings, use Veilux VMS or
m a nu a ll y access yo u r NAS device.
NOTE: On the Record Directory page, Status will be OK when NAS is
selected if NAS is accessible and all settings have been entered c o rr ectl y .
Status OK
8.9.2 Record Policy
The Record Policy menu allows you to set the microSD/SD memory card,
NAS, and FTP recording parameters. Once configured, the device can record
video directly to a microSD/SD card, NAS, and FTP.
To enable recording to microSD/NAS/FTP:
1. Click
Local Record>Record Policy.
2. Configure recording storage
l o c a tions in the Record Directory sub-menu.
See “8.9.1 Record Directory” on page 40.
NOTE: The camera will simultaneously record to all storage l o c a tions that
have been enabled in Record Dir ectory .
3.
To enable scheduled or continuous recording, check Enable under
Schedule Record. Select 7*24 H Record to record video continuously at
all times, or, select
Schedule Record to create a schedule for r e c o r d ing.
• If you select Schedule Record, click Schedule and configure recording
times.
The schedule is divided into 3 periods, and the camera will record
during all selected times in all 3 periods. Click
OK when finished
configuring the recording schedule.
4.
To enable Motion Alarm Recording, check Enable under Alarm Record.
Configure
P r e - re co rd i n g and P os t -r ec or ding times. Check Motion
Alarm, Channel.
5. Under Stream, select the stream to use for recording. Stream1 is
r e c o mmended if you want to record high quality video, stream2 is
r e c o mmended if you want to save bandwidth or storage space.
6.
Check Record Audio to enable audio r e c o r d ing.
7. Under
Storage Rule , select Cycle Write to enable the camera t o
overwrite the oldest recorded data once the available space in the
storage
l o c a tion is filled. Or, select Save Days to save video for a set