Car Rear View Security System User Guide Warning Specifications and manual content are subject to change without any notice. Before using the products, please read the manual and preserve it well.
KIT CHARACTERISTICS Before you request for repair Phenomena below are not necessary mean failure with Display. Please check off per following methods before you request for repair. ★Five inch high resolution color TFT LCD. ★Free power input: DC11V-32V. ★Three-channel CVBS input,one-channel video input. ★Normal/mirror image setup. Phenomena Possible Causes No picture, no sound Improper connection with Automobile adapter. Use of unauthorized power supply.Power Switch is on OFF position.
SYSTEM CONNECTION PRECAUTIONS Ⅴ、Trailer backup camera system connection LCD Color Monitor ★Before using our products,please read this manual first.
MONITOR SYSTEM CONNECTION Ⅲ、System connection diagram 3 Ⅰ、Technical parameters Display Device Color TFT-LCD LCD Color Monitor To start reversing wire(Brown)CAM1 To start reversing wire(Blue)CAM2 5.0 inch(Diagonal) Size Rear view Camera Power input 11 - 32V voltage input FUSE CAM1 Interface Digital TTL Analog CAM2 M CAM3 Resolution Dot Pitch(mm) Luminance (nits) Contrast Ratio Response Time (ms) View Angle (LR/UD) 640×RGB×480 320×RGB×234 0.0529(W)X0.1587(H) 0.107(W)X0.
MONITOR SYSTEM CONNECTION Ⅱ、Appearance and accessories Ⅰ、System connection diagram 1 CAM2 To Camera 2 extension cable Color LCD Screen Sunshade Waterproof connector Reversing signal cable CAM1(brown) Reversing signal cable CAM2(blue) Auto cigarette lighter Input:DC11~32V LCD Color Monitor Remote receiving window yellow Video CAM1 AV input 4pin screw AV cable connect follow the jack mark“ ” Volume+ white (audio) M Rear View Camera M VolumeDown Menu Cam1/Cam2 Shift C Power on/off M Bracket
CAMERA MONITOR Ⅲ、P recautions CAMERA Image Pick-up Device Storage and Keeping TV System Keep this machine away from too hot or too cold places. The storage temperature of this machine is-20~60 , the application temperature of this machine is 0~40 . veise Never use this machine near bathtub, wash basin, kitchen, etc places with water or at damp basement, swimming pool or similar places. veise Image Size PAL 1/3"B/W CCD Avoid t h i s machine f r o m dropping o r impacting. CCIR NTSC 4.9mm×3.
MONITOR CAMERA Ⅳ、MENU OPERATION Ⅳ、Technical Parameters Press to display options as following： COLOR CCD CAMERA CAMERA Image Pick-up Device TV System 1/3"SHARP CCD PAL Image Size 1/4"SHARP CCD PAL NTSC NTSC 3.6mm×2.7mm 4.9mm×3.7mm 510(H)×492(V) 500(H)×582(V) Scanning Frequency Horizontal:15.625KHz Horizontal: 15.7343KHz Horizontal:15.625KHz Horizontal: 15.
MONITOR Attention:CH prioity,CH delay and delay time only operate when backing the car.for example,Cam1 for CH prioity,if both reversing signal cales with power in,the screen just displays picture from Cam1,otherwise it displays picture of Cam2.
MONITOR REMOTE CONTROL CAMERA Ⅲ、camera appearance and dimension Ⅰ、Remote control appearence 1、Car Backup Camera IR LED 18 IR LED IR LED 6 IR LED IR project distance 15 meters IR project distance 5 meters Power supply DC12V/250mA Power supply DC12V/150mA Dimension(mm) 76mm×70mm×84mm Dimension(mm) 60mm×55mm×60mm Weight 350g Weight 330g IR LED 18 IR LED IR LED 8 IR LED IR project distance 15 meters IR project distance 5 meters Power supply DC12V/250mA Power supply DC12V/120mA
MONITOR REMOTE CONTROL Ⅲ、Remote Control operation CAMERA Ⅰ、Characteristics of Rear View Camera MUTE : Press this button, sound disappears, press it again or VOL+/ VOL- is to resume normal sound. POWER : Press this button is to turn off the monitor, press it again is to turn on the machine. 1 2 3 4 5 6 7 Alloy shell and 6.8G-force rated shock resistant. High resolution and low power consumption. Audio/Video signal outpur. 4pin aircraft grade weatherproof connector. Wide angle and adjustable bracket.
