Operation Manual

Five inch high resolution color TFT LCD.
Free power input: DC11V-32V.
Three-channel CVBS input,one-channel video input.
Normal/mirror image setup.
Automatic/ manual selection, when sutomatic, monitor in sleeping mode.
Compulsory signal switch:The images from CAM1 or CAM2 will be
activated automatically,when backing up the car or opening the
door of car.Reversing image priority.
Power supply of camera: while CAM1/ CAM2 is in operation, power of CAM2/CAM1
will be cut off automatically. Effectively prolong the life of the cameras and fulfill
the objective of saving car power.
Jacks of AV input and output.
Automatic induction of LED indicator.It will be activated
automatically while the environment is dark,so that the user
still can see the key of the monitor clearly.
Double PCB,effectively heighten the ability of shock resistance.(8G)
Remote control or manual operation.
Shell of the monitor is made from ABS resisting hight temperature and blast.
Blue light indicates startup,and red light indicates sleeping mode.
★
★
★
★
★
★
★
★
★
★
★
★
★
KIT CHARACTERISTICS
Before you request for repair
1
Phenomena below are not necessary mean failure with Display.
Please check off per following methods before you request for repair.
18
Phenomena
Possible Causes
No picture, no sound
Improper connection with Automobile adapter. Use of
unauthorized power supply.Power Switch is on OFF
position.
No picture
Check whether AV line is plugged well.
No sound
Whether audio wire is connected well, or the sound volume is
turned off or till minimum.
Dark picture
Whether bright and contrast adjust correctly;Whether
environment temperature too low.
No color
Whether color is well-adjusted
Upside down or lateral
inverted picture
Maybe improperly adjusted Horizonal,Vertical on the remote
controller.
No backing function
(i.e. Picture)
Whether the single blown/blue AV wire connecting to the
positive power cord of reversing light is loose or not. Whether
the connection head of red CAM socket is of poor contact.