Operating Instructions and Installation Instructions

1-4. Menu Operation
To enter MENU mode simply press the MENU button.
Each time you press the MENU button the screen will display one
of four adjustable modes,these menu modes are Picture, System,
Options and Clock.
(1) Picture
Contrast, bright, color and sharp displays on the screen
as illustrated below:
Use the DOWN button to scroll down the lost to the required
Option
For example we are going to select the Contrast option.
Now use the Vol- and Vol+ buttons to alter the Contrast value that
is displayed to the right hand side of the screen (Min setting = 0,
Max setting = 100).
You will see the screen contrast change as you alter the value.
Values for Brightness, Colour and Sharpness can also be changed
using above example.
Picture
Contrast 80
Bright 80
Color 60
Sharp 50
Select
Adjust
Down Select VOL + / VOL - : Adjust
1. TFT LCD MONITOR1. TFT LCD MONITOR 5. BASIC OPERATION METHODS5. BASIC OPERATION METHODS
3
12
Power box ON/OFF Switch
ON(Manual)
Power Switch For LCD
OFF(Auto)
Switch for CAM 1/ CAM 2
Display LCD
A V 2 State
Display LCD
A V 1 State
Input VCD/DVD
/TV Signal
TFT Shows
the Picture
Switch for CAM 1
Switch CAM 1
Signal
Display CAM 1
Picture
Switch for CAM 2
Switch CAM 2
Signel
Display CAM 2
Picture
When the drive selects reverse gear the reversing light receive
a switched +12V/24V to the positive side of the bulbs,
The momitor Auto display mirror piclture of rear view CAM1
Wireless equip ment is disturbed easily by the frequency
change of outside ambient
!