Installation manual

QuickClip ™
39
Blank Time Code Space
If you need to clear all of the media from Time Code Space, press the “Clear” button.
The “Blank TimeCode” screen will appear as above. This is the same as the Blank
TimeCode detailed in the Blank TimeCode Space section, but with the End TC set at 24
hours minus one frame, the end of time code space.
The default setting allows the user to clear all the media from their time code space. All
of the video and audio buttons are selected, and the time code section selected for
“clearing” begins at 00:00:00:00, and ends at 24 hours minus one frame. Press the Edit
button to perform this action.
If you for example want to clear all of the audio from time code space and leave the video
intact, de-select the video buttons and leave the audio buttons selected. Press the Edit
button to perform his action.