Users Manual

TROUBLESHOOTING 23
ERROR TYPES
There are two types of errors encountered by the Sparx™ Sharpener that can interrupt
operation. These types are: Function Entry errors and System Stop errors. Each error type is
described in the table below along with information about how the user is informed of the error.
5
TROUBLESHOOTING
ERROR TYPE DESCRIPTION DISPLAY METHOD
I: Function Entry
Errors that prevent the user
from entering into a function
(e.g. sharpening or alignment).
• Displayed through the user interface
(e.g. flashing lights at the area of concern,
such as the
Slot Cover lights).
• Temporarily displayed on the
Cycle
Counter.
• Not saved to Error History.
II: System Stop
Errors that cause the sharpener
to exit out of a function
because of safety concerns or
to prevent sharpener damage.
• Displayed on the
Cycle Counter.
• All functionality is disabled until the user
acknowledges the error by pressing the

Cancel Button.
• Saved to Error History.