Data Sheet

ManualsBrandsVELCRO® ManualsAdhesivesVELCRO® E1010000533002 Hook-and-loop tape for bundling Hook and loop pad (L x W) 480 mm x 25 mm Black, Red 10 pc(s)

INSTRUCCIONES DE TRABAJO

Versión nº: 2 Fecha de revisión: Septiembre 2011

IDT-605: Fichas técnicas de producto

Velcro Europe, S.A.: Toda la documentación gestionada mediante el software “GESDOC” está sometida a un sistema de control de la documentación. Cualquier copia impresa debe ser considerada instantáneamente

obsoleta a excepción de la “copia controlada”. El contenido de este documento debe considerarse confidencial y de uso interno

HOOK 088

Construction characteristiques

Basic construction

Base material

Woven

Polyamide

Standard binder backing Synthetic resin

Width : 50 mm

50 mm

100 mm

Nominal ± 1 mm

Nominal ± 1.5 mm

Nominal ± 2 mm

Overall thickness 1.70 - 2.05 mm

Weight 300 g/m² ± 10 %

Usage characterístiques

Peel Strength with Loop std * Average 2.0 N/cm

Minimum 1.3 N/cm

Shear Strength with Loop std * Average 10.3 N/cm²

Minimum 7.3 N/cm²

Cycle life * 50 % loss after 10000 cycles

Breaking Strength * Minimum 210 N/cm

Shrinkage after washing ( 3 x 60°C ) * Maximum 4 %

Colourfastness to washing UNE-EN ISO 105-C10 4 minimum

Colourfastness to dry cleaning ISO 105 sec/DO1 4 minimum

Colourfastness to rubbing ISO 105 sec/X12

Colourfastness to water ISO 105 sec/EO1

Colourfastness to sea water ISO 105 sec/EO2

Colourfastness to light ISO 105 sec/BO2

4 minimum

5 minimum (dark colours)

4 minimum (white and light colours)

3 minimum (fluor colours + polyurethane resin)

Colourfastness to perspiration ISO 105 sec/EO4 4 minimum

* Internal norm of VESA

The information included in this Technical Sheet is based on reliable tests and trials. Average value as a reference only, not a nominal specification. Given the

diversity of uses of our products we advise our customers to assure themselves that the product meets the requirements of their application. The responsibility

for the application and use of the product remains with the customer.

Elaborado: J.C. Lima Revisado: E. Ducet Autorizado: J. Jacobs

Fecha: 27.09.11

ANEXO: IDT – 605-B FTP 100 Versión 4

Summary of content (2 pages)

PAGE 1
INSTRUCCIONES DE TRABAJO Versión nº: 2 Fecha de revisión: Septiembre 2011 IDT-605: Fichas técnicas de producto HOOK 088 Construction characteristiques Basic construction Base material Standard binder backing Woven Polyamide Synthetic resin Width : Nominal ± 1 mm Nominal ± 1.5 mm Nominal ± 2 mm 50 mm 50 mm 100 mm Overall thickness 1.70 - 2.05 mm Weight 300 g/m² ± 10 % Usage characterístiques Peel Strength with Loop std * Average 2.0 N/cm Minimum 1.
PAGE 2
INSTRUCCIONES DE TRABAJO Versión nº: 2 Fecha de revisión: Septiembre 2011 IDT-605: Fichas técnicas de producto LOOP 001 Construction characteristiques Basic construction Base material Standard binder backing Woven Polyamide Synthetic resin Width : Nominal ± 1 mm Nominal ± 1.5 mm Nominal ± 2 mm 50 mm 50 mm 100 mm Overall thickness 2.35 ± 0.25 mm Weight 300 g/m² ± 10 % Usage characterístiques Peel Strength with Hook std * Average 2.0 N/cm Minimum 1.