Installation Guide ＆ Users Manual UNDER CABINET RANGE HOOD Model:KMJ01-30"/ KMJ01-36" NOTICE: For residential use only. Installer: Leave this guide with the homeowner. Homeowner: Keep this guide for future reference. Email address：Support@itylza.
TABLE OF CONTENTS THANK YOU FOR YOUR PURCHASE Thank you for your purchase. We know that you have many brands and products to choose from and we are honored to know that you have decided to take one of our products into your home and hope that you enjoy it. TYLZA appliances are designed according to the strictest safety and performance standard for the North American market. We follow the most advanced manufacturing philosophy.
IMPORTANT SAFETY INSTRUCTIONS ALUMINUM FILTERS Read all instructions before using this appliance. Save these instructions for future references Approved for residential appliances For residential use only IMPORTANT SAFETY INSTRUCTIONS CAUTION FOR GENERAL VENTILATING USE ONLY. DO NOT USE TO EXHAUST HAZARDOUS OR EXPLOSIVE MATERIALS OR VAPORS. CAUTION To reduce risk of fire and to properly exhaust air, do not vent exhaust air into spaces within walls, ceilings, attics, crawl spaces, or garages.
INSTALLATION REQUIREMENTS PARTS DIAGRAM 1.Please read the following instructions carefully. MODEL: KMJ01-30" KMJ01-36" 2.This Range Hood can be vented through the top or back. Remove the Air Outlet Cap according to the option chosen (Fig. 1). For ductless installation, install an Air Outlet Cap on both the rear and top vent holes. 3.For optimal performance the Range Hood must be installed 24" - 36" in height from the cooktop. (Fig. 2) 4.
INSTALLATION INSTRUCTIONS PRE-INSTALLATION PROCEDURES • Please read the instructions carefully. Unpack the Range Hood and check that all functions are working before installing. • Ensure that the voltage (V) and the frequency (Hz) indicated on the sticker match the voltage and frequency at the installation site. • Check that the area behind the installation surface to be drilled is clear of any electrical cables or pipes, etc.
PREPARING THE VENT HOOD: AIR RECIRCULATION MODE INSTALLATION INSTRUCTIONS CAUTION: HOOD MAY HAVE VERY SHARP EDGES; PLEASE WEAR PROTECTIVE GLOVES WHENEVER IT IS NECESSARY TO REMOVE ANY PARTS FOR INSTALLING, CLEANING OR SERVICING. Installing the Carbon Filter Wall Mount Installation Method 1. A. Find the 4 mounting holes in the back of the range hood. Mark their locations at the installation location with a pencil or marker. B. Drill 5/16 (8mm) hole at each of the marked locations. C.
PREPARING THE VENT HOOD: AIR EXTRACTION MODE OPERATING INSTRUCTIONS Check Valve Installation and Plugs Turns the range hood ON/OFF. If you have any questions about the Installing the Duct Connection Fitting with Damper, please feel free to contact our Customer Support at: support@itylza.com, and we will provide you with the video to install it properly.
MAINTENANCE TROUBLESHOOTING CAUTION: NEVER PUT YOUR HAND INSIDE OF THE UNIT WHILE ITS OPERATING. FOR THE BEST PERFORMANCE CLEAN YOUR RANGE HOOD REGULARLY. CAUTION: ALWAYS UNPLUG UNIT FROM POWER BEFORE SERVICING CLEANING 1. Use only mild soap or cleaning solutions to clean the hoods' outer surface. Dry surfaces using a soft cloth. 2. Stainless Steel cleaner may be used on the external surface. PROBLEM SOLUTION TOOLS My range hood is noisy. A.
MEASUREMENNTS ＆ DIAGRAMS ***All inch measurements are converted from millimeters.Inch measurements are estimated. ***All measurements in ( ) are millimeters.
Correct Disposal of this product: This marking indicates that this appliance should not be disposed with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.
