Owner manual

N
e
w
P
r
o
d
u
c
t
i
n
f
o
Oscilloscope, Function generator and Power supply in one.
November 2009
Another 3 in one unit from Velleman!
Following the success of our LAB-1 unit, a LAB-2 unit is born.
This unique unit includes a Digital Oscilloscope, a Digital function generator and a simple but easy to use power
supply. The 3 units are electrically separated for ease of measurement.
Measuring and testing just became easier and more affordable then ever!
LAB-2
1MHz Function generator
• DDS type generator (Direct Digital Synthesis)
• DAC resolution: 10 bits
• Frequency range: from 1Hz to 1.000.000Hz (± 0.01%)
• Frequency steps: 1Hz, 10Hz, 100Hz, 1kHz and 10kHz
• Waveforms: sine, square and triangle
• Sweep function with bi-direction option
• Output voltage: 15Vpp maximum
• Real output level measurement: dBm / Vrms or Vpp readout (±3%)
• Typical sine wave distortion (THD): < 0,1% @ 0dB / 600ohm
• Square wave rise/fall time: 0,2µs typ.
• Output impedance: 50 Ohm
• Multi- language menu (Eng / Fre / Dut / Ge / Es )
• LED backlight
In the box:
• LAB-2 unit
• Oscilloscope probe
• RCA adaptor
• Manual
• AC cord
Power supply: 115 or 230Vac / 20VA
Power supply
• Voltage output (fixed voltages):
3V, 5V, 6V, 9V, 12V ( ±5% )
• Peak output current: 1A
• LED Output overload indicator
• LED Output ON indicator
• Output ON/OFF switch
Oscilloscope 40MS/s
• Bandwidth: Up to 10 MHz ±3dB at selected V/div
• Input range: 1mV to 20V/division in 14 steps
• Input coupling: DC, AC and GND
• Sample rate up to 40MS/s
• AD resolution: 8 bits
• Time base: 250ns to 1h per division
• Auto set-up function
• Probe X10 readout option
• Readouts: DC, AC+DC,True RMS, dBm, Vpp, Min-Max. (±2.5%)
• Audio power measurement in 2 to 32ohm
• Max 100Vp AC+DC (input 600Vp using X10 probe)
• Standard 1M Ohm 60MHz x1 - x10 probe (included)
• LED backlight