Owner manual

N
e
w
P
r
o
d
u
c
t
i
n
f
o
2MHz USB Function Generator
2MHz USB Function Generator 2MHz USB Function Generator
2MHz USB Function Generator PCGU1000
PCGU1000PCGU1000
PCGU1000
April 2007
Specifications:
• Amplitude range: 0.1Vpp to 10Vpp @ 1KHz //600 Ohm / 0V offset
• Frequency setting resolution: 0.01%.
• With internal 40 dB attenuator (output divided by 100)
• Direct Digital wave synthesis (DDS), 8192 samples wave table.
• Amplitude resolution: 0.4% of full scale.
• Offset: from 0 to -5V or +5V max. (resolution 0.4% of full scale).
• Vertical resolution: 8 bits (0.4% of full scale).
• Sample rate: 50MHz.
• Typical sine wave distortion (THD): < 0.08%.
• Output impedance: 2 x 50 Ohm.
• Power supply: World universal 9V DC adapter, 600mA.
• Dimensions (wxdxh): 55x190x200mm (2.2”x7.5”x7.9”).
Small and stylish,
Space saving design
2.0 & 1.1 compatible
Bode plot functions, using any of our PC
scopes, PCSU1000, PCS500, PCS100.
Main screen
In the box:
Automated wave sequence generation
Features:
√ Frequency range from 0.01Hz to 2 MHz.
√ Crystal-based stability.
√ USB port is galvanically isolated from the PC.
√ Low sine wave distortion.
√ Two parallel output connectors for waveforms
√ TTL level synchronization output.
√ Stores up to 8192 of waveform points.
√ Standard waveforms: Sine, Square, and Triangle.
√ Predefined library waveforms included: Noise, Sweep,...
√ Create waveforms with the integrated signal wave editor
√ Sweep frequency range 0.0001Hz to 25MHz
√ Sweep time 1ms to 10 hours
√ Noise mode bandwidth 25MHz
√ Extended bode plot option together with PC scope.
√ Automated wave sequence generation, using file or com-
puter RS232 input.
Minimum system requirements
• IBM compatible PC
• Windows 98SE, ME, 2000, XP, Vista
• SVGA display card (min. 800x600)
• mouse
• free USB port
• CD Rom player
Wave editor
Getting started
manual
Turns your computer into a powerfull function generator !