Data Sheet

Revision 2.0 Page 56 of 74
nRF24L01 Product Specification
10 TX_ADDR 39:0 0xE7E7E
7E7E7
R/W Transmit address. Used for a PTX device only.
(LSByte is written first)
Set RX_ADDR_P0 equal to this address to han-
dle automatic acknowledge if this is a PTX
device with Enhanced ShockBurst™ enabled.
See page 65
.
11 RX_PW_P0
Reserved 7:6 00 R/W Only '00' allowed
RX_PW_P0 5:0 0 R/W Number of bytes in RX payload in data pipe 0 (1
to 32 bytes).
0 Pipe not used
1 = 1 byte
…
32 = 32 bytes
12 RX_PW_P1
Reserved 7:6 00 R/W Only '00' allowed
RX_PW_P1 5:0 0 R/W Number of bytes in RX payload in data pipe 1 (1
to 32 bytes).
0 Pipe not used
1 = 1 byte
…
32 = 32 bytes
13 RX_PW_P2
Reserved 7:6 00 R/W Only '00' allowed
RX_PW_P2 5:0 0 R/W Number of bytes in RX payload in data pipe 2 (1
to 32 bytes).
0 Pipe not used
1 = 1 byte
…
32 = 32 bytes
14 RX_PW_P3
Reserved 7:6 00 R/W Only '00' allowed
RX_PW_P3 5:0 0 R/W Number of bytes in RX payload in data pipe 3 (1
to 32 bytes).
0 Pipe not used
1 = 1 byte
…
32 = 32 bytes
15 RX_PW_P4
Reserved 7:6 00 R/W Only '00' allowed
Address
(Hex)
Mnemonic Bit
Reset
Value
Type Description