Instruction Manual
Warranty & Service
Your CS4MX is guaranteed free of manufacturing defects as conrmed in our
written warranty. Contact us if you have any concerns about the operation of
your detector.
The C.SCOPE Customer Service Team really know about metal detectors and
are always ready with good advice and rapid after-sales-service.
The CS4MX is a robust design, however the control box should be treated with
similar care as any electronic product. Dry off any water splashes immediately.
The search-head may be immersed in water although the connector at the
other end of the lead should always be kept dry. Stem and search-head parts
should be cleaned and dried at the end of a day’s detecting. Do not use
solvents. If the detector has been used on a beach it will be necessary to
wash sand and salt residue off the stem adjustment mechanism and the
search-head retaining parts using tap water. The use of a search-head cover
protects the head from abrasion damage caused by friction with the ground.
Remove batteries if the detector is going to be stored for any length of time.
Do not open the controlbox front panel. There are no user serviceable parts inside
and you may invalidate your warranty.
Detector careSensitivity, ground eect & discrimination
11