User manual Manual

FREQUENTLY-USED FUNCTIONS

5.2.2 Detailed record setting

Right-click to display the main menu, and select “ADVANCED CONFIG” Æ “RECORD”.

Note: Please DO NOT change the date or time of your DVR after the recording

function is activated. Otherwise, the recorded data will be disordered and

you will not be able to find the recorded file to backup by time search. If

users change the date or time accidentally when the recording function is

activated, it’s recommended to clear all HDD data, and start recording

again.

ADVANCED CONFIG

CAMERA MANUAL RECORD ON

DETECTION EVENT RECORD ON

ALER

TIMER RECORD ON

NETWORK PRE-ALARM RECORD ON

DISPLA

OVERWRITE ON

RECORD EVENT RECORD ALL CH OFF

DEVICES KEEP DATA LIMIT (DAYS) OFF

RECORD CONFIG SETUP

EXI

1) MANUAL RECORD

Set the manual recording function on / off.

2) EVENT RECORD

Set the event recording function on / off.

3) TIMER RECORD

Set the timer recording function on / off.

4) PRE-ALARM RECORD

Select to enable or disable the pre-alarm function (ON / OFF).

When pre-alarm and event recording functions are both activated, the DVR will

record 8MB data before an alarm / motion event is triggered.

5) OVERWRITE

Select “ON” to overwrite previous recorded data in your HDD when the HDD is full.

When this function is on and the HDD is full, the DVR will clear 8GB data from the

oldest for continuous recording without notice.

6) EVENT RECORD ALL CH

Select to record all channels (ON) or record the channel with an event only (OFF)

for any event.