Datasheet
KITS
Velleman
®
NV, Legen Heirweg 33 - Gavere (Belgium)
Velleman.eu - Vellemanprojects.com - Velbus.eu
13
+
Extras
The boards can easily be separated, for independent programmer use -
An external supply connector for the tutor board is provided -
Specications
Experiment module can be powered via USB -
Power output to target is supported -
Indicator LEDs for power supply and programming mode -
Dimensions: -
Programming and Learning Module: 90 x 74mm / 3.54 x 2.91” ɶ
Programmer only: 34 x 74mm 1.34 x 2.91 ɶ
Features
PICKit2 compatible programmer -
Includes : PIC16F882 -
Tutor sample programs in “C” and “assembler” can be down- -
loaded:
Button input reading ɶ
LED on/off ɶ
LED blinking ɶ
Buzzer and Display driving ɶ
LED brightness ɶ
Analog value reading ɶ
... ɶ
Read up to 4 push buttons for ‘digital in’ simulation -
Light up to 4 LEDs for ‘digital out’ simulation -
Read the value of a potentiometer (analog value) -
Read the value of a temperature dependent resistor (NTC) -
Read the value of a light dependent resistor (LDR) -
Dim a white LED using PWM signal -
Learn how to drive a LED digit -
Learn how to drive a buzzer -
Want to set the rst steps into Microchip PIC programming? This board is all you
need!
The tutor can help to get you started into the magic world of PIC programming.
Later it can also be used for more advanced programming.
Use the free tools from Microchip
®
; the PICKit2
TM
programmer tool and the
MPLAB
®
IDE environment.
Datasheet
USB PIC programmer and tutor board
page 1 of 1
Component : EDU10
November 2012
Velleman N.V.